This is a discussion on A-arm/CV gaurds within the Grizzly Accessories forums, part of the Grizzly Forums category; Trying to find aftermarket aluminum A-arm/CV boot guards. I have a 2007 grizzly 700 with 2" highlifter lift with 28" zilla tires on 12" rims. ...
Trying to find aftermarket aluminum A-arm/CV boot guards. I have a 2007 grizzly 700 with 2" highlifter lift with 28" zilla tires on 12" rims. Only need the rear guards. Bought a set from aluminumproducts and after i ordered and recived them i was told they dont fit with a lift in so im back to the drawing board. Just wondering what other grizzly riders with a similar lift are using for aluminum guards.
Mine hit the brake calipers Cuz of my lift. Trimmed em with the sawsall just like you said and they fit fine. Got mine off e-bay. Theuy fit fine in the rear tho.
2007 Grizzly 778
Ehs built motor
105.5 cp 11.5 piston
5mm hot rods crank
bored throttle body
ehs custom cam
coop 45 sheave with 20g rollers and gold epi spring
pc5 w/auto-tune and lcd 200
gorilla axles all the way around
"custom" rear differential support
31" outlaws on sti 14" beadlocks
2" hl lift
Yamaha rear box