This is a discussion on Need advice, first winch install. within the Grizzly Accessories forums, part of the Grizzly Forums category; I need to install a Superwinch Tera 3500 on a 550 Grizzly. I wonder if anyone has any advice on where to put the solenoid? ...
I need to install a Superwinch Tera 3500 on a 550 Grizzly. I wonder if anyone has any advice on where to put the solenoid? And where is the best place to get 12 volt, key switch power? Also the kit came with a circut breaker that looks to me like it leaves alot of positive current uninsulated. It looks like two breakers put together with 2 pieces of metal to attach the power to. and no insulation on the bare metal... Any advice would be very appreicated..
I mounted my solenoid under the hood of my quad. If you have EPS it may or may not fit in there. My winch also has the circuit breakers, i wrapped it in electrical tape and put it under the seat then i tie wrapped it to the frame.
I will take a picture of the breaker and put it up.
__________________ 2008 Yamaha Grizzly 450 in Camo