This is a discussion on Push pins body rivets plastic wigits within the Grizzly Chassis & Body forums, part of the Grizzly Forums category; Not sure the Actual term, but I read on here that I needed 8mm. So I ordered them off of eBay and they are way ...
I use Yamaha replacements....90269-07010-00....I bought them and changed all of mine to that size by drilling the smaller ones out to fit this size, a suggestion from WUN a while ago. This works well for me.
If you go to Home Depot, Lowes or Menards You can pick out the size that you need.
On the link problem. It seems that they frown on the entire link being displayed. I could be wrong.
If you edit the link so just a name that you decide appears I think it makes them happy.
This is a link to this page that will display the entire address.
I had seen the same thing on here and I got 8mm witch was to big I just drilled the holes out not a big deal u never would know I did it just drill the holes out and used them I use all 6 for my fenders way better then stock Phillips ones!!
11' 734 Ehs's intake lid cam & port work 11.1 piston +2 valve+3mm TB kibble springs PCV/Autotune Barker duals dyntex ignition JBS sheave 16g dr pulley greaseless .5 shim gold spring Elkas 28" zillas rhino axles
YACC residing king #27
I bought a small bag from my local Napa store. They had many diff sizes and shapes.
07 Grizz 700 FI EPS
Warn/Yamaha 2500 lb Winch
Soft camo Cabela's rear bag
Swisher univ mount and plow
Symtec heated grips and thumb
DDM 6K 35w HID lamps
11 mm blue LEDS at 4 corners
2" blue digital temp gauge
I switched to the Honda ones, they were bigger also so I drilled them out a little bit, much better than the stock ones IMO.
Red 2007 700 eps
Uni air filter
25" BH 2.0s on ITP 312s
Powermadd hand guards
EHS BIG 3 Package-Barkers slip-on, efi controller, and ehs open air box lid
Viper Max 2500# Red synthetic amsteel rope
Blue 2012 550 eps
id rather not drill the holes out, unless i run out of other options. i scooped up a 50 count bag of 6mm clips from ebay. shipping from new york. hopefully ill get to try them by the end of the week. thanks guys.
it seems like a lot of people use the 8mm. i wonder if they changed for certain years.
2007 grizzly 700 EPS
26" OG bighorns/1.5" spacers
1.5mm shim, purple spring
tamarack classic front box, tamarack titan luxury lounger homemade passenger pegs
5" rox risers with tusk aluminum handlebars and tusk molded heated grips w/thumb warmer
12" combo totron DC led bar with totron flood duallys and totron dually reverse light
homemade full coverage uhmw-pe skid plates, yamaha HD bumper
homemade 2" receiver hitch, viper classic 3500# winch