This is a discussion on 30" tires, what kind of clutch mods? within the Grizzly Engine & Transmission forums, part of the Grizzly Forums category; Ive looked around quite a bit and it seems there is so many different things you can or are supposed to do. Im not firmilar ...
Ive looked around quite a bit and it seems there is so many different things you can or are supposed to do. Im not firmilar with #1 or 2 or 3 mods or what they are, or what springs go where or shims or weights.... I just put 30" itp mud lites on my 2011 grizzly 700 and i have noticed after a few rides its lost its low end torque. Obviously i need to do some clutch mods. hopfully i havent messed anything up. I need help pleeeease!!!
lol i just got done watchin one of those videos before i checked the fourm again. Im pretty handy and well with motors to begin with. this seems like a extremely simple procedure. I didnt know at first if it involved actually pulling the clutch or what. Seems pretty simple weights and shims and secondary spring.
When you get into your clutch take the washer from the outside of your primary and take it to a fastener supply shop. Get them to match the size or just a bit bigger then get a whole bunch they are cheap, ranging from 1.0-2.3mm for future use.