Yamaha Grizzly ATV Forum banner

2017 Grizzly 700 oil filter

8K views 8 replies 6 participants last post by  griz7 
#1 ·
Hello. Looking for oem oil filter part #. Got one at dealer yesterday doing oil change today and the filter i got aint the same as on the machine. 0 info onlime for the 2017

Thanks
 
#3 ·
The one from the factory is a low profile filter, the filter on the new wolverine sxs is taller both are used on the new 708 engine, the taller one maybe the one they gave you, hope this helps
 
#8 ·
So if I understand correctly the standard oil filter is a low profile filter (WIX # 57040) and could be replaced by a higher profile filter (WIX # 51358...............................under 2017 wolverine r-spec on wix site?? same 708cc as the Grizz, no?)
 
#5 ·
Naaa. Just make sure you let the quad sit for 15 or 20 minutes after firing it up after an oil change. Check level and fill until it's full.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top