Yamaha Grizzly ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 7 Results
  1. Grizzly Engine & Transmission
    Hey, new here and I’ve read too much on this, but had a question… My 07 grizzly wouldn’t hold an idle and we tried everything. I finally had enough and just bought the new carb and installed it. I also must add, I’m new to working on these things and haven’t touched anything 2 or 4 strokes...
  2. Parts For Sale
    I have worked about 4 weeks on my Griz600 and have burnt 2 CDIs up ! I added a wire harness and stator and It starts but runs erratically like spark timing is off ! So I would like to try another CDI but I don’t want to Pay an arm n leg ! Anybody have one ? Thanks
  3. Grizzly Talk
    I have been trying to get my Griz600 running right for 3 weeks ! Grandsons used it and it quit running , no spark ! New stator etc and started but ran terrible ! Found a burnt capacitor on cdi . Installed used cdi and burnt it also but ran same as other cdi . Came to conclusion wire harness had...
  4. Grizzly Electrical & Lighting
    Would anybody have a single page wiring diagram (if they make one) for the 1998 Grizzly 600 ? I find it very confusing using the separate page diagrams in the service manual such as Ignition , charging , cooling etc .
  5. Grizzly Talk
    So my '12 Grizzly 450 I bought brand new from the dealer back in 2013. Ran great and I never had any issues with it. I decided sometime in 2014 that I would put a Big Gun Eco slip on exhaust on it. That is where my problems began. Following the advice I received here, I rejetted the carb with a...
  6. Grizzly Engine & Transmission
    Choke cable, starter set, starter cable I have seen it called a few different things. Either way, While removing my carb the threaded piece broke off inside the carb(obviously trapping the cable inside as well). I already have a new cable set on order so I don't necessarily "need" to salvage the...
1-6 of 7 Results
Top