Yamaha Grizzly ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Grizzly Talk
    Hi all new to site , having problems with my quad for a while now intermittent running problems , sometimes won't start at all . Poor power with jabbing throttle hard and popping and banging . Stalling on slow pace sometimes worse than others . Also not throwing any codes up at all . Any body...
  2. Grizzly Engine & Transmission
    Ok so I’ve had this problem for a while on my 2012 grizzly 300. Basiclly my quad preforms perfectly fine when going under 25-30 miles an hour. But anytime I go above about 25 miles an hour it sounds and feels as if the gears lock up for a split second. I will hear a loud clank coming from the...
  3. Grizzly Engine & Transmission
    Could someone tell me what this hose is and if it’s normal for this to be leaking? Thank you! It’s on a 2003 Yamaha 660 grizzly
  4. Grizzly Tech Tips
    First post, just joined the forum. I recently picked up a 2012 700 and it wont stay running. I haven't tried anything yet, but when i flick the key, give it a chance for the fuel pump to finish its thing, hit the start button and it will wine over all day, so i quit, flick the key off and on 4...
  5. Grizzly Talk
    Hey, i am doing a full rebuild on my grizzly 600, and got a det question before im diving into the engine, im going to replace the chain, do i have to replace the tensioner aswell? And is it any timing tool i need? And im going to adjust the valves, what clearence im going to need on the valves...
  6. Grizzly Electrical & Lighting
    Hey everyone....... New Here and I’ve posted my lame introduction and at 50yrs old I’m not sure what I should or shouldn’t post. Either way, I’ve been working on my farm Grizz 700FI, 2009 and while I’m not a mechanic I know my way around tools. So after rebuilding my clutch with new weights...
  7. Grizzly Engine & Transmission
    Me and my dad were doing an oil change and this metal nipple appeared. We are worried to put it back in because we don't know witch direction it goes. Hope this makes since, thanks for any help.
  8. Grizzly Talk
    Hello all, new here. I'm trying to find a stock muffler for a 07' grizzly 700. My main concern is how loud the aftermarket one is that the previous owner installed. I will be using it one some semi-residential job sites and don't want to disturb anyone. Shoot me your prices/pics. Thanks
  9. Grizzly Engine & Transmission
    2002 Yamaha Grizzly 660- aftermarket exhaust, 2500 miles, 900 hours Please help this thing is pissing me off. I bought this quad with the engine torn apart knowing it needed a new crank. Was told it ran great but who knows. Anyways, threw it together with the new crank and the engine seems to...
  10. Grizzly Engine & Transmission
    Hello, everyone. I have a 2003 Yamaha Grizzly 660 with about 4000km on it. I am having a oil consumption problem. I will have the bike with the correct amount of oil in it, I will take it for a ride, usually riding the backroads, cruising around 60kph. I'll drive for about 20km and when I get...
  11. Grizzly Tech Tips
    Just got this 98 Grizzly 600, total torque monster. Four wheel and winch makes its fun but I've parked it out of concern for the engine noise till I can diagnose and repair. Took a video and uploaded to YouTube. Any feedback welcomed. Love my Yamaha's, just want to make sure I don't cause...
1-11 of 11 Results