Search Results for ‘grizzly’

All 4 of my engine mounts are separated. Has anyone done engine mounts on a 700 ? I tried prying the engine up so i could squeeze the mount out but there wasn't enough room.

Starting off, I apologize if this question has been answered already, I did some searching but I don't have great skills formulating the search phrase so I haven't come up with an answer. I seriously damaged one of my rear wheels last year and need to replace it. I was able to beat it out so...

Will someone with a 660 grizzly please do a test to help me? I cannot locate another 660 display to try but if someone could please help that would be awesome! if you take the display out, it has the small 3 prong connector on the display, it has a black wire (ground) red with green stripe...

Hey, new here and I’ve read too much on this, but had a question… My 07 grizzly wouldn’t hold an idle and we tried everything. I finally had enough and just bought the new carb and installed it. I also must add, I’m new to working on these things and haven’t touched anything 2 or 4 strokes...

Hello everyone, hope you're doing well Recently after riding I noticed something wasn't right at the rear end of my Grizzly. On hard surfaces when turning I heard a grinding, clicking noise. Normally I ride on unpaved roads so I didn't notice for how longs this has been going on. The noise...

I have a 2000 Grizzly and can't hardly ride it because it burns my inner legs and thighs so bad. I think I might be missing plastics but surely this heat would melt them. Does anyone have this issue or know how to fix it?

We have a 1998 yamaha grizzly 600 I need help getting the old girl running, I've had her for 14 years and always took good care of her until we moved she sat. I just had the carb done and put her in and a new battery. So she's good in that aspect. Now what happens when I put it into neutral...

I recently got a 98 griz 600 and am going through everything to get it running best before taking it to local atv park. With minor issues with carb and neutral light flashing( shifter has been adjusted by local shop so I'm leaning towards sensor and carbs junk with no adjustable parts... other...

Hey all names Moe. I’m not yet an owner, but will be this year (2021). I have been researching ATVs and decided on a Yamaha Grizzly, about a 2009 to 2015 model. Can’t afford new!☹️ All help and opinions welcome.

Recently order and installed the Warrior riser snorkel kit. Didn't like the fact that it cut through storage box but really didn't like that it left it unsealed and completely useless. Also, with hoses run in, harder to get apart for any servicing. My solution was a few extra fittings and...

I have a new 2020 Grizzly 700 EPS SE and the first bit of snow riding I put it in I’ve lost both the front and rear brakes intermittently. The wheels were definitely packed with snow and frozen mud. So I understand that is the likely culprit. I’ve seen a few other forums talk about this but none...

Found my son a 2004 grizzly 125 barn find that has been sitting since 2005/2006. He’s turning 6 and had been on at s and dirt bikes since 2.5yrs old. I went ahead and rebuilt the carb. Fires right up, runs great, now it leaks fuel out the overflow when off so ordered new floats (these ones are...

Ok we have spent hours and hours on this thing to no avail. 2004 Grizzly 125 (Baby Grizz) has been completely gone through. Completely disassembled and reassembled. Case split : 2 new gears added (wasnt going into fwd gear.) Entire engine put back together to spec. Timing is perfect...

I'm considering selling my 2011 Grizzly 550. It has 140 hours and 1,052 miles on it. Well taken care of with all scheduled maintenance done (including valve checks). Has 25% on original tires. Plastics have a few light scratches but are still nice and shiny. I just don't use it much and put...

I need a the main wire harness for my ‘98 Grizzly600 and if anyone has a cdi at a decent price also .