Yamaha Grizzly ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Grizzly Talk
    I recently bought a 2000 grizzly 600 that had been sitting in a guys heated shop for 2 years. It won’t start so I started working on it and at first it would turn over with the electric start button. Now I have nothing, no click from the starter solenoid. I replaced starter solenoid, battery...
  2. Grizzly Engine & Transmission
    A while ago i chnaged oil on my grizzly 300 and a ball bearing decided to make its way out. Theres nothing bad that happens now without that bearing, the wuad still works good but i need to know if i should maybe open up the motor and and start investigating where it came from to replace the...
  3. Grizzly Engine & Transmission
    Ok so I’ve had this problem for a while on my 2012 grizzly 300. Basiclly my quad preforms perfectly fine when going under 25-30 miles an hour. But anytime I go above about 25 miles an hour it sounds and feels as if the gears lock up for a split second. I will hear a loud clank coming from the...
  4. Grizzly Engine & Transmission
    I have a grizzly 300 2012. Recently flipped it and have fixed a few problems along the way. One new problem I’ve encountered is it locking up. I will be riding in high and low gear and have the same problem. I discovered it when having it in low gear dragging my arena. All the sudden it made a...
  5. Grizzly Engine & Transmission
    I have a grizzly 300 2012, and have recently came across a new problem I have not yet had. It started with if I were to putt the atv into high rpm then I would get a hard locking sound and the quad would lock up for a split second in the middle of moving. The next day I rode it again and it...
  6. Grizzly Engine & Transmission
    Hey all, I have tried to search through here but no luck. At least not with my exact issue or the fixes haven’t worked. I just got a 2003 Grizzly 660 that has definitely seen better days. It needed a timing chain so I fixed that and went to start it once all was done and everything seemed to...
  7. Grizzly Engine & Transmission
    I have a grizzly 300 2012, recently I flipped it and just got done fixing everything. But just found a new problem. If I run it for long enough the grizzly will start to die down as if it ran out of gas mid ride. And gas is completely full. This only happenes after around 5 minutes of riding...
  8. Grizzly Engine & Transmission
    I have a grizzly 300 2012. I’ve been having problems with my rear brake caliper a lot and just need tips on how to fix it. When applying the rear brakes it works good and the brakes still work but the piston for the brake pad won’t retract causing the pads to rub on the brake disk for the rest...
  9. Grizzly Engine & Transmission
    I’ve been looking and looking it up for a bit but still can’t find anything. Some people say the Yamaha grizzly does not have a parking break but some say they do. I have a 300 2012 automatic and I’m looking at how to engage the parking break. There is a lever on the handle say that says parking...
  10. Grizzly Engine & Transmission
    I have a grizzly 300 2012 and Recently flipped it. I worked through a couple problems on fixing it. One of the things we did was adjust the shift rod on the right side of the quad to get the gears back to the right place, after I putt the quad back togethor I went to go ride it and all the gears...
  11. Grizzly Talk
    I just bought a 2012 Yamaha grizzly. I have a question about the quad. When first riding it for the day I’ll give it a minute or two to warm up then I’ll putt it in gear and go to drive it, but what it will do is move a couple inches then make a loud pop noise and stop moving but it will keep...
  12. Grizzly Chassis & Body
    I’ve been searching for days now and can not find a color code on my grizzly. Leading me to think either I’m not looking hard enough. Or the previous owner took it off for some reason. Does anyone have suggestions of where to look or if you have the same quad what color code yours is. All I can...
  13. Grizzly Talk
    I’ve been searching for days now and can not find a color code on my grizzly. Leading me to think either I’m not looking hard enough. Or the previous owner took it off for some reason. Does anyone have suggestions of where to look or if you have the same quad what color code yours is. All I can...
  14. New Member Introductions
    I just bought a 2012 Yamaha grizzly. I have a question about the quad. When first riding it for the day I’ll give it a minute or two to warm up then I’ll putt it in gear and go to drive it, but what it will do is move a couple inches then make a loud pop noise and stop moving but it will keep...
  15. Grizzly Talk
    Hey yall, I'm having an issue lining up a new rear left axle into a knuckle on my 03 Yamaha Grizzly 660. I cannot push in both knuckle bolts that go through the lower and upper control arms. The new axle was bought on Amazon...
  16. Yamaha Big Bear/Bruin/Wolverine ATV Discussion
    I have an 88 big bear 350. I started a discussion a while back about a few problems i had. I managed to fix those..i think. Some pre history. This was a trade. A very bad trade i might add. I aas told she was a 2000 but later figured out its an 88.. ran fine on the day of trading which is why i...
  17. Grizzly Talk
    I need some help figuring out what mods I should do to my 2003 Yamaha Grizzly 660. So far it has 26” mud lites but I want to throw on either 28” zillas or 28” Terminators from Superatv. — GrizzBoy03
  18. Grizzly Talk
    So I’m buying a grizzly 700 it’s a 2013 and efi the listing said that sometimes it will act like it has a dead battery, but once it’s running it runs great, does anyone know how to solve this problem, and is it cheap or am I going to have to spend more money, also is this a bad buy, it has...
  19. Grizzly Engine & Transmission
    Me and my dad were doing an oil change and this metal nipple appeared. We are worried to put it back in because we don't know witch direction it goes. Hope this makes since, thanks for any help.
  20. Grizzly Electrical & Lighting
    wires for on off engine kill switch
1-20 of 21 Results
Top