Yamaha Grizzly ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Yamaha Kodiak Discussion
    Hey guys, Just bought a 2001 kodiak 400 that has this spark issue. I get one and only one spark when I press the starter and sometimes a second one when depressing it. Resistance is good on pickup coil and charging/rotor rotation direction detection coil. With a peak voltage adapter, I am...
  2. Grizzly Electrical & Lighting
    Can somebody tell me if the switch #13 drive selector would be on or off as pictured ? Maybe help me read how the circuits work together to allow the cdi to work
  3. Parts For Sale
    I have worked about 4 weeks on my Griz600 and have burnt 2 CDIs up ! I added a wire harness and stator and It starts but runs erratically like spark timing is off ! So I would like to try another CDI but I don’t want to Pay an arm n leg ! Anybody have one ? Thanks
  4. Grizzly Talk
    I have been trying to get my Griz600 running right for 3 weeks ! Grandsons used it and it quit running , no spark ! New stator etc and started but ran terrible ! Found a burnt capacitor on cdi . Installed used cdi and burnt it also but ran same as other cdi . Came to conclusion wire harness had...
  5. Grizzly Electrical & Lighting
    Would anybody have a single page wiring diagram (if they make one) for the 1998 Grizzly 600 ? I find it very confusing using the separate page diagrams in the service manual such as Ignition , charging , cooling etc .
  6. Grizzly Electrical & Lighting
    Have other posts about problems I’ve had getting my Griz running . After all the things I’ve done to get spark I replaced a stator that OHMd ok with a new stator with pickup coil and it started but backfired and ran terrible ! I replaced the cdi (capacitor swelled) with a used cdi and it burnt...
  7. Parts For Sale
    I need a the main wire harness for my ‘98 Grizzly600 and if anyone has a cdi at a decent price also .
  8. Grizzly Tech Tips
    originally had my griz600 stop running and then wouldn’t start ! After testing all coils , valve lash , compression (115psi) and all tested ok I bought a used cdi . After cdi install it still wouldn’t start (no spark) ! So even though the stator , pulse/trigger and charge coils check within good...
  9. Grizzly Electrical & Lighting
    1998 Griz 600 ! All coils check good ohm wise ! Switch on/off all seem ok ! After testing coils and checking switches I figured cdi was bad so I bought a used one ! Still no spark ! Yes it is possible the used cdi is also bad . The only thing I am unsure of is if I can check source/charge coil...
1-9 of 9 Results