Search Results for ‘stalling’

Hello I have purchased a 600 grizzly that stalls when braking and jumps into gear, generally it stalls from that as well. My research points to the one way bearing but I'm not sure if that would fix all my issues. I was messing around and managed to get into gear and don't seem to have a rev...

My 07 grizzly 700 dies at random times while riding. Used to happen only after riding awhile when it was hot but now it happens whenever. It will start to lose power like you shut the key off and start backfiring and usually start to come back to life and run fine for awhile then start again...

I've been running into a issue with my grizzly stalling when I give it fast full throttle at Idle. Filters clean, spark plug is new, pulled and cleaned injector, and have new fuel. The atv seems to run fine if you go slow into full throttle. I also have a velocity ecu. Unfortunately I can't test...

Hello all I am new here so sorry if I am posting this in the wrong place. I am having an issue where my grizzly stalls when I go to hit the throttle after letting it idle for a minute or so. This happens every once in a while. I rode the machine in the morning at an off road park with no issues...

So my 2018 Grizzly 700 has been a great bike. It runs great, handles great, and has for the most part been tough as nails. The only problem so far at all, has been that it stalls out when the exhaust even gets slightly under water. Like i can, without very much effort at all, put my hand over...

2002 Yamaha Grizzly 660- aftermarket exhaust, 2500 miles, 900 hours Please help this thing is pissing me off. I bought this quad with the engine torn apart knowing it needed a new crank. Was told it ran great but who knows. Anyways, threw it together with the new crank and the engine seems to...

Hey gang. New user here. I'm having a new problem with my 2002 Grizzly 660 where it will start and run great cold, then when it is warmed up and idling, it will sputter and die. Then it will be very difficult to restart. I have read about the vapor lock/fuel boiling issue now and did a...