[Martin660]

Will an 03 a arm fit on an 02
Thanks in advance

 

[dezz]

The parts should fit. The only difference between the 2 that I know of was the knuckles and hubs.

 

[NewGrizz]

Why do you need to replace it? Do you plan on replacing with new?

 

[Martin660]

Ball joint is shot I found one off an 03 that looks new for 17.00

 

[Lawman11]

I would just replace the ball joint.. Just me.

 

[dezz]

I would just replace the ball joint.. Just me.

You can't replace the upper control arm balljoints on a Grizzly 660. They are welded in and can't be purchased seperately. You must replace the whole control arm.

Only the lower control arm ball joints are replaceable on a 660.

 

[NewGrizz]

Follow this link to Coleman Power Sports. Should take you to the Trail Tamer 500. Many of the frame and suspension parts are the same as Grizzly 660. I replaced both of my front upper a arms on mine. As a bonus the ball joints are replaceable They come with new bushings but you need to purchase the ballpoints separate and install yourself. http://shopping.na3.netsuite.com/s.nl/c.3546502/sc.27/category.34047/.f

 

[Brett Bailey]

New grizz can you confirm this works on an 05 660?

 

[NewGrizz]

I can only confirm it fits my 2004 660. The 660 model was made from 2002 to 2008. If Yamaha upper a arm part numbers are the same for all year models I presume it will fit your 2005