Yamaha Grizzly ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
My question is what all I need to buy to convert 02 grizzly to 03-08 grizzly front axles? I have been digging into this and am going to get the steering knuckles for the single bearing carriers and the axles. I am thinking the hubs will still work and the axles have the same spline count. Any help before I waste a bump of money would be awesome. Sorry for the long post
 

·
Registered
Joined
·
209 Posts
Sounds good the only other part you might need are the axle nuts. If I recall the 02 was a castle nut and used a cotter pin.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Ok the axles I am looking at come with nuts and cotter pins. Thanks for your help. I will repost when I get it all put together if it works or not.
 
1 - 4 of 4 Posts
Top