Yamaha Grizzly ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
Got a 2005 Grizzly 660. Had to replace the key switch due to the wife losing the key to it. Took the four wheeler in for service and they said the start solenoid was acting up and would sometimes just click when you hit the start button. Bought a new solenoid hooked it up and now it starts sometimes and sometimes you gotta remove the seat and wiggle the harness that plugs into the solenoid. Checked the power and ground cables and they are tight.
Also noticed yesterday that you have to hold pressure on the key to make the fan come on. Any ideas on what I can do or look at to get these issues fixed
 
1 - 1 of 1 Posts
Top