I have a2006 kodiak 400. The battery give it up. I installed a new one. Now nothing no neutral light won't crank. Checked all the fuses. All fine. Lights come on. That's it. Any ideas?
06 kodiak 400 installed new battery but now no display or crank
1 - 4 of 4 Posts
Remove, clean and reinstall all battery, solenoid, starter and chassis ground terminals. Did you charge your new battery?
Those are first steps before troubleshooting any electrical issue and in many cases will fix your issue.
Those are first steps before troubleshooting any electrical issue and in many cases will fix your issue.
It's a new battery and yes I charged it before installing it. I'll clean all the contacts.
Joined
·
13,191 Posts
Welcome from Colorado.
X-2 on above, what you're describing is a low voltage problem.
You can do a continuity check to identify a rubbed wire to ground that is draining the battery.
X-2 on above, what you're describing is a low voltage problem.
You can do a continuity check to identify a rubbed wire to ground that is draining the battery.
1 - 4 of 4 Posts
