Yamaha Grizzly ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
So here it goes I have a 2009 grizzly 450 what I've already checked or replaced
New OEM starter new OEM left handle bar switch and solenoid plus a new battery
I have all indicator lights I have cleaned grounds checked connectors start button will only make the solenoid click once what are the 4 wires going to the solenoid
 

·
Premium Member
Joined
·
9,851 Posts
Welcome from Colorado.
Have you checked the ground at the frame?
 

·
Premium Member
Joined
·
9,851 Posts
Where are they ican only find the main at the engine
I've never had my hands on a 450, nobody around has one, sorry.
A loose or corroded ground connection has been the problem with others, so I mentioned it.
Your bike has engine mount dampeners so needs a good ground, look around the back, lower half of the engine is my guess.
if someone else doesn't come around, and you need a f.s.m., look here;
 
1 - 4 of 4 Posts
Top