Yamaha Grizzly ATV Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
So having a problem with finding bbk kits as well cams such as a "mudder cam" they all say 07-13 so what about the 14's are the motors different the cams or rods or pistons? or has nobody developed or tried to developed them? would really appreciate some insight if yal could help. haven't found anything on any forms.
 

·
Registered
Joined
·
115 Posts
14s and 15s have a completely different head design since they upped the compression from 9.2:1 on the 07-13 to 10:1 on the 14-15 they still kept the 686cc however. I personally haven't seen much engine mods for the 14-15. try searching the Yamaha Viking 700 they are still using the updated 686.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
KHansen thanks man I appreciate I knew they upped the compression but I didn't know it was a complete new head design kinda makes since then so ill do some searching with the Viking an see what I can come up with
 

·
Registered
Joined
·
134 Posts
Caldwell, please share what you find out. I have a 2014 as well. Thanks,
 

·
Registered
Joined
·
7 Posts
Discussion Starter #5
i will ross still diggin:nerd:
 

·
Registered
Joined
·
760 Posts
I've been looking for a while for cams. Webcams is the only place I found that will make something for the 14-15's. They can take the stock cam and do a custom weld and grind. I have a thread all about it when I was looking at going with a 734 BBK. I believe they told me it was around $280 plus you'll have to do rocker arms and what not. Hot cams don't make any drop in cams for us 2014's unfortunately. I decided to try a 11:1 High Compression CP piston first, and wet clutch slugs and a gold spring and if I end up wanting more, I'll build the 734 like I originally wanted to.

Here's my findings So far...

http://www.grizzlycentral.com/forum/showthread.php?t=92561
 
  • Like
Reactions: rosscopeeko
1 - 6 of 6 Posts
Top