Yamaha Grizzly ATV Forum banner

2016+ Stock rims with 28 Mayhems ?

2K views 10 replies 4 participants last post by  Darkness 
#1 ·
Hey guy's

Ive got a 2016+ Grizzly SE with the black aluminum rims (Not sure the width specs on OEM) and I'm looking to throw on some Mega Mayhem

Front: 28-9x12
Rear: 28-11x12

Does anyone run this tire spec on the factory rims and are there any issues?
Thank you!
 
#4 ·
i have a set of 28's mega mayhems on ITP 212. They are awesoom you will like those boots for sure
 
#6 ·
i have a 2inch custom built lift and am running 28x9x12 mega's rims are 4.5 offset same as front stock aluminum, i just ordered 2inch wheel spacers because its a little tipsy now. I hope this cures it
 
#8 ·
If your running 28s chances are your playin in the muck. A lift gives you more clearance and getting hung up on the undercarridge is what gets you stuck so the lift is benificial. But I am not sure if you need it to run these tires.
 
#9 ·
You don't need a lift to install 28" tires. You can run up to 30" without a lift.

Your factory wheels are 12". Any tire for a 12" wheel will mount up on them.

Do not overthink this. These tires will mount up no problem on your Grizzly.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top