Yamaha Grizzly ATV Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
hey ya'll I'm trying to install the 2" lift on the rear and it will not drop far down enough.. anyone else have this issue? is it the axel stopping it or does anyone know?
thanks for the help
 

·
Premium Member
Joined
·
12,259 Posts
On what?
What brand lift?
Are the a-arms at full droop/extension?
 

·
Registered
Joined
·
10 Posts
I’m having a time trying to get the bolts to line up. I’m a one man show I got the front on with no problem
 

·
Registered
Joined
·
19 Posts
I had the same problem couple weeks ago. I took a 24" crow bar reshaped the tip, screwed a D ring to floor used a ratchet strap to get it pulled down and lined up.
 

·
Premium Member
Joined
·
12,259 Posts
I had the same problem couple weeks ago. I took a 24" crow bar reshaped the tip, screwed a D ring to floor used a ratchet strap to get it pulled down and lined up.
Not to start a $hit storm over a lift mod but......
Have you considered the different pressures on the suspension parts when the machine get light, or comes off the ground, while riding? and the higher angles through the axle joints?
 
  • Like
Reactions: grizzlygar
1 - 5 of 5 Posts
Top