Yamaha Grizzly ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I have a Yamaha grizzly and I’m having issues with it running. That last few times I’ve been able to get it to start after it sitting for awhile but after I let off the throttle it does. And it’s like the worlds is falling apart to start it up again. I pulled the carb off ( it’s brand new replaced it a few months back) and it’s spotless. Drained the fuel which it was really weird it was more like water which could’ve been part of the issues. Today I put it all back together and started it and let it run and it did fine put it you quickly hit the throttle to rev it up it just crapped out on you, then it died (dan out of fuel) now it won’t start back up. Any ideas could it be a stator or the CDI? Missing the 600 getting tired of the 660.
 

·
Registered
Joined
·
5,545 Posts
There is many things that could cause this.
Just for giggles, open the fuel cap run the engine. See if it improves. If the tank vent is plugged, it will not run. It'll starve for fuel.
 
  • Like
Reactions: NormB
1 - 2 of 2 Posts
Top