Yamaha Grizzly ATV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter · #1 ·
Alright everyone. This is on my 2018 700. As y’all can see there is a bow in my air box, I’m trying to make it water tight for snorkels, and I’m sick and tired of dealing with silicone! It just isn’t working, however I did only apply the silicone while the air box was on the atv, this is my first time taking it out. What looks bowed to y’all? The lid or box? I don’t see how some of y’all don’t use silicone and just use the stock gasket for going deep in water(with snorkels). Should I buy a new lid(or box) with the gasket and try that?
Wood Automotive tire Motor vehicle Automotive exterior Gas
Automotive tire Wood Motor vehicle Tree Bumper
Plant Gas Water Cookware and bakeware Wood
Plant Tree Gas Automotive tire Auto part
 

·
Registered
Joined
·
337 Posts
Nothing's going to seal that with all the crap that's already on it. Probably better to start with new or try to clean that up a lot. As far as what's bowed put a straight edge on it then decide. I'm betting the lid.
Seriously.
 
  • Like
Reactions: Bryson_cutchen
1 - 2 of 2 Posts
Top