Yamaha Grizzly ATV Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
9,514 Posts
I have an old ¼" screwdriver that I have ground down to the width of the slot and sharpened to a wood chisel shape. Sharp enough to get under the peen with an angle steep enough to lift the stake. The side of this Rednecker tool can be used to re-stake the nut. Been using it for years.
This fall I replaced several nuts that have been off and on many times.
 
1 - 1 of 1 Posts
Top