Yamaha Grizzly ATV Forum banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
9,279 Posts
Your really only need the bushings and the sleeves. The bolt nut and covers can be reused.
 

·
Just wanna ride!!
Joined
·
5,542 Posts
if I just replace bushings is that good or do you have to replace the sleeve too>?
See reo's post above...

I've always used OEM parts for that kind of stuff. They're usually relatively inexpensive and yours apparently lasted awhile!
 
  • Like
Reactions: waltinbatonrouge

·
Just wanna ride!!
Joined
·
5,542 Posts
ok I do have an odd question does anyone know if the knuckle bushing on the grizzly are the same bushings in a yfz450 a-arms or raptor a-arms
You can go to a parts site like partshark.com and look at the part numbers for both machines.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top