Yamaha Grizzly ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
This horse has probably been beat to death but got to ask anyway. 06 Bruin, won't start with starter button. Red wire at solenoid has positive current, the 2 blue wires have positive until you hit the start button, then they go to ground. Solenoid still not engaging. What's my next move?
I read where someone cut the blue wires and worked around this type issue but didn't know for sure if it'd take safeties out of bike. (kids ride also)
 

·
Premium Member
Joined
·
9,262 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #3
I failed to mention I can jump the solenoid and it will start and run with no issues except the starter won't work with starter button. Lights work as should, I do notice the oil light comes on when you hit the start button.
 

·
Premium Member
Joined
·
9,262 Posts
If the started works jumped, i bet you have a chaffed wire somewhere.
 
1 - 5 of 5 Posts
Top