Yamaha Grizzly ATV Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Tonight I was installing a part and mistakin the eps connector on the steering column with the plate that says "don't open" well I didn't see that till after I took that plate off unscrewed two screws that held the connector on saw it wasn't what I was looking for screwed it back on and put the plate on (that's when I saw the writing on the plate). Now my eps light is on. Any suggestions
 

·
Just wanna ride!!
Joined
·
5,518 Posts
Welcome to GC. I’m sure somebody will along to help you out. Is the EPS working now that the light is on?
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Seems to be working still...the light doesn't blink or anything. I just found it weird that it came on after I unscrewed that part and then screwed it back on
 

·
Just wanna ride!!
Joined
·
5,518 Posts
Did you cycle the key after it came on? That will clear codes sometimes.
 

·
Premium Member
Joined
·
10,674 Posts
Welcome from Colorado.
Our member 501 Parts might be able to help with this.
If he's not on here soon, give him a P.M.
A F.S.M. can be had on-line from;
https://www.tradebit.com/
if needed.
 
1 - 8 of 8 Posts
Top