Yamaha Grizzly ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
254 Posts
Discussion Starter · #1 ·
I have an issue with my wheel camber. Not sure what is going on. I can tell that the Right Front is worse than the left front just by looking at it. If I put a level on rear wheels they are perfect. If I put it on the Left front wheel it tips in(neg camber about 3/8" at the top. Right wheel tips in 1 inch. What is up with that. Wheel bearings are fine. I see no issues with the spacers. I don't see anything bent at all. Right now I have front Right spring maxed out to see if it would be better and Left spring is one notch from the top. Any ideas how to rectify this?
 

·
Registered
Joined
·
5,704 Posts
Check wheel bearings and ball joints for movement.
 

·
Premium Member
Joined
·
2,289 Posts
Maybe check the a-arm bushings also.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top