Yamaha Grizzly ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Machine: 2009 Grizzly 550 se.

Hello;
First off, Merry Christmas to all. Thanks for a great forum.

I was wondering if anyone can answer a question from the following example:

You change the fuel pod setting at the C1 screen (by grounding yellow/white wire, pushing display switches, turning on ignition, etc.).
In this example, assume the setting is changed from 0 to 50.
You save the 50 setting by turning off the ignition.

Here is the question:
If you go back in to change the fuel setting again, does the C1 screen initially display the 50 (the last saved setting), or always display 0 again?

What I am asking is if I will be able to see the latest saved setting (whether it be factory, or user adjusted), when I go in to make an adjustment.
This is so if I need to go back to the initial setting, I will know what it was.

Thank you all very much.
 
1 - 1 of 1 Posts
Top