Yamaha Grizzly ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1


I got my Grizzly in 2013, and have had no problems until now. I was starting to loose brakes in the back then they stopped period. I took a look and found this crack. Is this why my brakes dont work? am I loosing hydraulic preassure? Any imput is appreciated.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
5,545 Posts
That crack definitely is not helping the matter. What probably happening is the caliper is moving/flexing at that crack area when you apply the brakes. This can cause a soft and spongy brake handle.
This is a probability anyway. Even if this crack is not causing the weak brake problem, or still needs to be repaired.
 

·
Registered
Joined
·
5,545 Posts
Give everything a good visual inspection. Make sure the caliper mounting bracket is not bent and the rotor is still aligned.
It must of been an impact to cause that crack. Just need to make sure nothing else got damaged as well.
 
1 - 4 of 4 Posts
Top