grizzly 700 2013 AWD switching on an off by itself

871 Views 6 Replies 3 Participants Last post by okbear, Sep 25, 2017

prune

Discussion Starter · Sep 24, 2017

Hi,

I noticed that the AWD (4x4) mode is continuously switching on and off while the switch is turned to 2WD. Maybe it's coming from the switch itself ? Due to water into it ?
Could it be from the electronics ?
anyone had this issue ?

Thanks

Save

1 - 7 of 7 Posts

Madkawi750

· #2 · Sep 24, 2017

Here's some info from a thread a couple weeks back.
Four wheel drive kicking in and out and not responding to switch

https://r.tapatalk.com/shareLink?sh...com/forum/showthread.php?t=62729&share_type=t

Sent from my iPhone using Tapatalk Pro

Save

okbear

· #3 · Sep 25, 2017

All the info you need is right here...
http://www.grizzlycentral.com/forum...-drive-kicking-out-not-responding-switch.html

Save

prune

Discussion Starter · #4 · Sep 25, 2017

Many thanks to you all ! I made a search but not with the right keywords it seems

I'm in Quebec. I'll try to call the dealer and see if I can have the switch replaced. I'll let you know !

Save

okbear

· #5 · Sep 25, 2017

Ya might try talking them into just giving you the new switch. The fix on your current switch is very easy. That way you have a spare. It's worth a shot and has worked for at least one other member. Let us know if it works out for you.

Save

prune

Discussion Starter · #6 · Sep 25, 2017

Sounds my serial number is not in the list !

I'll try disassembling the switch next time I'll go to the Chalet... stay tuned

Save

okbear

· #7 · Sep 25, 2017

prune said:
Sounds my serial number is not in the list !

I'll try disassembling the switch next time I'll go to the Chalet... stay tuned

Yea. Try the fix in that thread. I bet it'll work. Be careful. There's some tiny springs and ball bearings in there.

Save

1 - 7 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month