Yamaha Grizzly ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Ok here's the deal was riding everything was great shut it off and now nothing. I turn on key and nothing will run if pull started but blows ignition fuse went over whole wire harness unplugged and cleaned every plug still nothing. I ran a jumper from battery to the switch turn on key and everything works but then blows ignition fuse. Any ideas ?
 

·
Premium Member
Joined
·
10,163 Posts
Sounds like an old 660 with wires rubbing/grounding? along the upper left frame rail along the gas tank shield.
 
1 - 2 of 2 Posts
Top