Yamaha Grizzly ATV Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter #1
How do you get the rubber line stopper on? I have the synthetic line so i can't take off the thimble.
 

·
Registered
Joined
·
253 Posts
It's tough! I used some dish soap and pulled it through with another piece of rope tied to the eyelet and threaded through the rubber stopper 1st.
 

·
Registered
Joined
·
723 Posts
I would take the line off of the winch drum, feed the stopped on, and reattach the winch line to the drum..
 

·
I Mucked up AGAIN?!?!
Joined
·
3,185 Posts
I would take the line off of the winch drum, feed the stopped on, and reattach the winch line to the drum..

x2....take the line off the spool and it threads through easy, easy, THEN you can assure your line is also wound on properly>>>>
 

·
Registered
Joined
·
45 Posts
I thought the same thing. unwind it completely off. Thread it and place back on the spool.

tada. done.
 

·
Registered
Joined
·
348 Posts
I had the same problem on the Max 3000 I purchased. I had to unspool all the line and disconnect the rope. Easy thread of the rubber piece, reconnected the rope to the spool and rolled it up under a load. Hope that helps.
 
1 - 10 of 10 Posts
Top