Yamaha Grizzly ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter #1 (Edited)
I have a 07 700 griz. It ran fine but had a blown head gasket. So I finally got off my butt to fix it and bought a big bore HC 11-1 piston kit off ebay. After install it started up fine and ran just like it should but it dies after 30 seconds of running/idling. Then fires right up and dies again again. Any ideas on what I should be looking for to fix this?
 

·
Registered
Joined
·
2,242 Posts
I would guess it's fuel related.... Did you install a fuel tuner?
 

·
Premium Member
Joined
·
10,958 Posts
or the gas turned bad and is stopping fuel flow.
 

·
Registered
Joined
·
90 Posts
Discussion Starter #4

·
Registered
Joined
·
90 Posts
Discussion Starter #5
And the culprit was a clogged fuel filter. Took off the filter stuck everything back into the tank and it runs just as it should. So a new filter is on the way.
 
  • Like
Reactions: dezz
1 - 5 of 5 Posts
Top