Yamaha Grizzly ATV Forum banner

Install power steering on non power steering grizzly

2662 Views 1 Reply 2 Participants Last post by  dezz
Hey guys i have a 2010 grizzly 700,non power steering. There is a guy in town selling a stock power steering system off of another grizzly, my question is will this stuff just bolt right up or will i need to custome make some things. Thanks in advance.
1 - 2 of 2 Posts
It's more than just the power steering motor. You also need the steering stem, lower cam plate (can remember what it's actually called right now), complete wiring harness and the gauge cluster. You may even need the CDI, although that I am not sure of.

It is essentially bolt on parts, but it's not as easy as you think. It's alot of work and alot of different parts.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top