Yamaha Grizzly ATV Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello, I'm new to atv's but not to motorcycles. Could someone tell me if there are good after market wet clutch parts manufacturers. Also, replacement oil cooler.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
It is recommended that you use factory wet clutch, and not sure on oil cooler .
Thanks, for the advise. I have a 1998 grizzly 600 with 2800 miles, a elderly gentleman bought it new. The oil cooler has folded over fins from a pressure washer.
 

·
Registered
Joined
·
130 Posts
They make what is called a rad fin comb to help straighten the fins. Maybe give it a try, those coolers are not cheap at least here in Canada. I had to buy a new one for my 600 about 12 years ago and it cost $ 380. I have also used a small flat screw driver and carefully straighten the fins .
 

·
Registered
Joined
·
50 Posts
Did the same thing to my 600's oil cooler. I bought a used one on Ebay for $50 which works fine.
 
1 - 8 of 8 Posts
Top