Yamaha Grizzly ATV Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi all,

Over the weekend i picked up a 2014 Grizzly with 101 hours and 700 miles on it. The first owner used it on their farm. The owner i bought it from decided to remove the baffles in the exhaust. Is there an easy way for me to put them back in, or should i just be looking for a replacement. It sounds nice, but its too loud and i imagine the tune is off because of it.
 

·
Premium Member
Joined
·
11,897 Posts
Welcome from Colorado.
That's a tip/spark arrester he might have replaced with a 2" tip only. A picture of your current tip might help us help you more.
 

·
Premium Member
Joined
·
11,897 Posts
Looks like you have a stock muffler with no tip/spark arrestor. You may want to screws to.
 

·
Premium Member
Joined
·
11,897 Posts
I said looks like, with the mud on it I think it has the original can and shielding. If its stock the tip/arrester and the right screw(s) should be all you need.
 

·
Registered
2020 kodiak 450SE
Joined
·
285 Posts
Yeap. You could save yourself a few bucks and get the bolts from the hardware store
 

·
Premium Member
Joined
·
8,632 Posts
Order the gasket also.
 
1 - 10 of 10 Posts
Top