Yamaha Grizzly ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
So I need help with my son's beartracker. Need help with how the semi auto clutch works. The tracker will pull the wheels up in first after it's warmed up but driving 3rd to 5th the clutch is slipping. My question is what do each clutch do? I bought the fibers and steels on a whim. But after taking it cover off I found out the one way bearing on the centrifical clutch was bad. Now I'm second guessing myself. I ordered the one-way bearing. But what is the job of each clutch.my experience in these are limited but I was under the impression the centrifugal clutch allowed you to stop in gear without it dying. And the fibers are the drive clutches.
 

·
Just wanna ride!!
Joined
·
5,512 Posts
I'm not familiar with that model but we have some guys here that likely are. Keep checking back.
 

·
Premium Member
Joined
·
9,006 Posts
Hum...
Tell me exactly which bike you have and let me look at the system.
As far as I know, either bikes have a wet clutch engaged by fly weights or a clutch with friction plates compressed by springs.
I don't know your bike so help me find it online to look at the system.
 
1 - 4 of 4 Posts
Top