Yamaha Grizzly ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
295 Posts
Discussion Starter #1
When you install the secondary spring do you have to torque the nut that holds the spring on? If so what is the number?
 

·
Premium Member
Joined
·
1,693 Posts
Yes, the secondary spring retainer nut is 90 Nm (9.0 m-kg, 65 ft-lb). The secondary sheave assembly nut is 100 Nm (10.0 m-kg 72 ft-lb)

 
  • Like
Reactions: gundog

·
Registered
Joined
·
295 Posts
Discussion Starter #3
Thanks Hammerhead and thanks for putting me on to 501 parts.com
 

·
Premium Member
Joined
·
1,693 Posts
Not a problem, Oleblue has been solving our problems before we even knew we had them, ha. And yes a plug for 501Parts can't be bad either.
Cheers with that secondary, now shim it up some more.
 
  • Like
Reactions: gundog

·
Registered
Joined
·
295 Posts
Discussion Starter #5
Would it be wise to blue Loctite the small screw's on the primary cover?
 
1 - 5 of 5 Posts
Top