Yamaha Grizzly ATV Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1
Hello, I have 2003 grizzly 660 wondering what size socket I need to remove primary and secondary sheeves? And socket size to remove the nut to replace the spring on secondary. Thanks
 

·
Registered
Joined
·
5,539 Posts
22mm deep socket for removing clutches.

45mm or 1-13/16" socket for removing secondary spring.
You'll also need a way to compress the spring in order to reassemble it. Use Google or youtube to find lots of information and videos on it.
 
  • Like
Reactions: waltinbatonrouge

·
Registered
Joined
·
53 Posts
Discussion Starter #4
So I picked up a 1 13/16 socket for the secondary spring. I have a 2003 yamaha grizzly 660. I have read alot of threads that say different things. Some say 45mm,some say 46mm, some say 1 3/4,and some say 1 13/16. Will this 1 13/16 fit my 03 660?
 

·
Registered
Joined
·
2,104 Posts
Listen to Dezz.
The 1 13/16 is the proper socket.
 

·
Registered
Joined
·
53 Posts
Discussion Starter #6
Thanks vincent, yes dezz is awesome. I have gotten alot of good advice from dezz. I bought the the 1 13/16 like he said. Thanks dezz!
 
1 - 6 of 6 Posts
Top