My starter solenoid all 4 of the wires coming to it in the plug are hot and only the 2 red ones in back are supposed to be hot I believe I replaced the cdi box and the solenoid and sisnt help any help please
Well, my 05 660 just quit on me.
Was going downhill ish, just about at the rec limiter when the engine lost power.
Coasted to a stop at the trailer and she puttered to a stop, idled very poorly for a few seconds and then the engine died. Won't restart and feels like it has very low...
I just bought a 2002 Grizzly 660, bone stock besides some mudzillas that are stock sizing and and rad relocate. I’ve read all over that these bikes would hit 60+ no problem, but mine seems to limit out around 46 mph. It pulls hard up until about 43 then just seems to run out of speed, and sounds...
hey guys ive got a 2019 grizzly 700 se and looking for some more things to do to it
so far ive done
-home made snorkel
-home made rad relocate
-slug kit on order
just looking for some more mods
Well my 09 Grizz 550 went boom and the connecting rod blew thru two places in my cases. So I figured with how expensive it is to rebuild these when you need cases I mine as well go for a 700 engine. I looked around eBay and found a used suppose to be 09 Grizz 700 engine I'm not sure how to...
Ok, so I swapped the belt out after getting water in the case and shredding the old belt. The problem that I have came across it the primary clutch does not seem to be engaging until higher RPMs. I have lost about 15mph on the top end. It wasn’t like this before. I’m completely stumped and...