I did a search and found a few thread regarding this but wanted to double check my logic. Lately I've been having trouble with my Grizzly stalling out so have been using my starter a lot. Recently it got to the point where the solenoid will click but not activate the starter. While everything was connected I checked the solenoid and had 12v coming in but only a small .3v increase when pressing the starter button. I disconnected the leads to the starter and checked again and had proper 12v out. I pulled the starter and applied 12v directly to it and got it to spin. I am guessing either the starter is drawing too much as in a short or the solenoid is weak. What are peoples thoughts, where should I go from here?
Thanks in advance!
Thanks in advance!
