Yamaha Grizzly ATV Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Got it started today
2013 Grizzly 700
Bought at Copart a month ago
needs new plastics & some more power washing
it does have a torn boot on the front driver inside shaft
are these shafts changed just like a car?
haven't got the rear fender off yet
Tire Wheel Vehicle Automotive tire Motor vehicle
 

·
Premium Member
Joined
·
12,794 Posts
You can replace axle boots, individual parts or the entire axle shaft as desired.
 

·
Registered
Joined
·
91 Posts
  • Like
Reactions: oleblue22

·
Vendor
Joined
·
752 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #10 ·
Thanks oleblue22
have checked the servo and it is good
have 2 relays coming from 501
when I cleaned the switch there were contacts that looked more burnt than corroded
which doesn't surprise me as i think this machine was stored outside
t that kinda steers me to a fuse
 

·
Vendor
Joined
·
752 Posts
Thanks oleblue22
have checked the servo and it is good
have 2 relays coming from 501
when I cleaned the switch there were contacts that looked more burnt than corroded
which doesn't surprise me as i think this machine was stored outside
t that kinda steers me to a fuse
Got your relays on the way to you. Thanks. You can clean that switch and may can get it to work again.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #15 ·
didn't make it to the shop this weekend
got the relays in the mail
thanks 501
i have power to the system (diff lock light is on)
when i try to unlock light starts flashing (switch is working?)
so the switch tells the relays where to position the motor at
is it really that simple or am i overlooking something
 
1 - 15 of 15 Posts
Top