Yamaha Grizzly ATV Forum banner
1 - 20 of 47 Posts

·
Registered
Joined
·
800 Posts
Discussion Starter · #1 ·
I haven't seen a thread like this recently so why not make one? Here's the rules, list at least your top five mods, at most list your top twenty. If you don't have five mods done yet then just list off the ones you have or like the most. One more rule, if you have Elka's these can be your #1, BUT you must list five others! No cheating. Prices/values are always appreciated so others can look and see what it would run them to have that setup. Post away and let's have some fun! Banter welcome!
 

·
Registered
Joined
·
800 Posts
Discussion Starter · #2 · (Edited)
I'll start.
2002 Grizzly 660
2mm shim kit $10
EPI Purple Spring $30
Warn Winch ??? Came with it
Kawasaki wheels ???
STI Black Diamonds $250
 
  • Like
Reactions: mainehunter

·
Registered
Joined
·
1,433 Posts
1. upgraded stator cover and stator, $400
2. Kenda radial Bear Claws, ITP wheels, overfenders $980
3. Windshield $110
4. front box $65 ? ( Christmas gift from wifey!)
5. rear box/lounger $250 (these things cost too much for how cheaply they are made)
6. 2" receiver hitch $80
7. synthetic wire winch rope and KFI stopper $50
8. voltmeter about $15 or $20 I think
9. stainless steel draw latches on rear box lids $75
More to come, spring overtime is coming!
 

·
Premium Member
Joined
·
12,259 Posts
Mods listed in the signature.
 

·
Registered
Joined
·
800 Posts
Discussion Starter · #6 ·
Mods listed in the signature.
Would you mind typing those out? Those of us using mobile version can't see the signature.

Sent from my Z971 using Tapatalk
 

·
Registered
Joined
·
147 Posts
2006 grizzly 660

Top 5 or top 5 I've actually used lol? I've done alot lately but the bike is still in pieces.

1. Aluminum Products skidplates

2. MSR bars and 3.5" rox risers with Moose/ODI grips and acerbis handguards (knockoff/rebranded) *have not ridden*

3. 28x12x12 Deestone Mud Crushers (aka GBC Dirt Devil 2s) on Raceline wheels

4. Added high density foam to the seat when I re-covered it. Truly glorious.

5. 1.5mm Clutch shim, orange secondary and combination 16/18 gram clutch weights.

Havent ridden these either

6. 10:1 686 big bore kit with stage 1 hotcam

7. Oil cooler and high capacity radiator

8. Steering stabilizer

9. Synthetic winch rope w/stopper and aluminum hawes

10. 12" 72 watt lightbar

11. HD quadboss tie rods

12. HMF utility exhaust with quite core, spark arrester and a fresh repack. Hope it's not as darn loud as before the repack.

I'm sure there is more I'm forgetting. I'll prioritize the list once I'm running again .

Sent from my SAMSUNG-SM-G870A using Tapatalk
 

·
Registered
Joined
·
2,773 Posts
-Coop45 machined sheave
-Orange EPI spring
-Pitbull Growler XOR BG2.5
-Head Demon grips
-1" aluminum spacer at all four corners
 

·
Registered
Joined
·
1,433 Posts

·
Registered
Joined
·
365 Posts
My #1 upgrade was going from a 2004 330 Polaris trail boss to my 2016 grizzly $$$$
#2 Elka 3 shocks $$$$
#3 26” Big Horn tires and itp black steel rims $$$$
#4 EHS fuel controller, air box filter mod, air box lid $$$
#5 coops 45 mod.3, EPI Purple spring $$$
#6 terra 3500 super winch $$$
#7 tiger Tail tow sys. $$$
Just to name a few of the more expen$ive mods.^^^I don’t remember all the prices, I try to forget stuff like that really fast but I am sure my wife could tell you to the penny, but let’s not involve her right now!
 

·
Premium Member
Joined
·
12,259 Posts
Would you mind typing those out? Those of us using mobile version can't see the signature.

Sent from my Z971 using Tapatalk
Copied and Pasted;
Fast Green Convertible "06" 660 on 26" BH OG's with Stock Wheels.
COOP45 Primary, 1.5 mm shim, -1.5 mm belt, Purple Secondary Spring,
21 gram weights, weight covers reduced to 29 mm diameter and a 2 mm Cut Cam Plate.
2 heat range hotter plug, Warn Winch, Passenger Foot Rests, Rock Deflectors, Heated Grips and Hand Mitts,
Grab Strap, Cooling System Up-Grade and multiple position mirrors.

I forgot about small screens on cell phones, or is it the limited low end power?
Can you shim or machine a cell phone?
 
  • Like
Reactions: Grizzcrazy

·
Registered
Joined
·
800 Posts
Discussion Starter · #15 ·
Copied and Pasted;
Fast Green Convertible "06" 660 on 26" BH OG's with Stock Wheels.
COOP45 Primary, 1.5 mm shim, -1.5 mm belt, Purple Secondary Spring,
21 gram weights, weight covers reduced to 29 mm diameter and a 2 mm Cut Cam Plate.
2 heat range hotter plug, Warn Winch, Passenger Foot Rests, Rock Deflectors, Heated Grips and Hand Mitts,
Grab Strap, Cooling System Up-Grade and multiple position mirrors.

I forgot about small screens on cell phones, or is it the limited low end power?
Can you shim or machine a cell phone?
Thank you! Could you describe or post a pic of those rock deflectors? Are those skid plates?

Sent from my Z971 using Tapatalk
 

·
Registered
Joined
·
1,548 Posts
Top 5

1. Elka Stage three
2. Rox 5'' Risers and bars with ODI Rogue lock on grips.
3. 26''Blackwater Evos with ITP SS216 wheels
4. 3500# Viper Elite Winch
5. Rigid Dually LED

Sorry guys I can't list the cost. My wife is in the same room! :grin2:
 

·
Registered
Joined
·
1,433 Posts
@Vincent, you already know that I think you have the sweetest 550 around!
 

·
Registered
Joined
·
1,433 Posts
  • Like
Reactions: it400

·
Just wanna ride!!
Joined
·
5,541 Posts
My sig....
-2014 Grizzly 700 EPS, Bad A$$ Camo
26" Bighorn OG's, ITP Black Ops SD Beadlocks, Garmin Dakota 20 with Ram Mount, KFI SE 3500 Stealth Winch, Midland GXT5000 2-ways, Heat Demon dual zone, Wes Industries trunk, Full Ricochet skids, Moose 2" receiver, 12" combo light bar, whiskeymike custom switch dash, Blue Sea 5025 fuse block, Rotopax 4 gallon fuel pack, Water Wetter, Purple spring, Powermadds hand guards, rear flood cubes, 1.7mm shim, Uni air filter, Rock lights, Gold Plugs, Rox Risers, AIS block, Halos

Out of these...
-Shim / spring
-Wheels / OG’s
-Winch
-Rox Risers
-Powermadd hand guards
 
1 - 20 of 47 Posts
Top