Yamaha Grizzly ATV Forum banner

Won't start in gear and no brake light with rear foot and lever applied

1063 Views 5 Replies 4 Participants Last post by  dnglbre
2008 Grizzly 700 will not start in gear and no brake light when foot lever and left hand rear brake lever applied. Seeking solutions...please help
1 - 1 of 6 Posts
Check the switch on the left handlebar perch. It's held in with a metal clip. Those can get sticky sometimes and will not extend when you pull the handle.
  • Like
Reactions: 1
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.