Yamaha Grizzly ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter #1
hello,
looks like the bolts i received with the winch kit that arrived monday, jan 22 were incorrect. i got everything ready and planned to get it installed tonight and when i went to mount the plate, the bolts didnt fit in the hd bumper and frame mount points...

i searched and found this thread:
http://www.grizzlycentral.com/forum/grizzly-accessories/21678-bolts-winch-mount-700-a.html

this needs to be addressed so others do not have this problem. guess i'm off to the hardware store in the morning. sucks.

the other poster also found the correct size: M10 with a 1.25 pitch

the INCORRECT bolts I have are stamped: JDF 8.8

thank you.
 

·
Registered
Joined
·
353 Posts
hello,
looks like the bolts i received with the winch kit that arrived monday, jan 22 were incorrect. i got everything ready and planned to get it installed tonight and when i went to mount the plate, the bolts didnt fit in the hd bumper and frame mount points...

i searched and found this thread:
http://www.grizzlycentral.com/forum/grizzly-accessories/21678-bolts-winch-mount-700-a.html

this needs to be addressed so others do not have this problem. guess i'm off to the hardware store in the morning. sucks.

the other poster also found the correct size: M10 with a 1.25 pitch

the INCORRECT bolts I have are stamped: JDF 8.8

thank you.
What brand kit? I purchased a Warn winch mount kit 74496 and it had the correct bolts for our 2012 Grizzly 700.
 

·
Registered
Joined
·
62 Posts
Discussion Starter #3
motoalliance has already got back to me. thank you Motoalliance for the quick reply.

for anyone else, i picked up four M10 x 1.25 20mm bolts at lowes and washers.

i needed 2 washers for the frame mount to adjust for the longer bolt (16mm was supplied) and 1 on the HD bumper mounts.
 
1 - 3 of 3 Posts
Top