Yamaha Grizzly ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter #1
Received these in the mail today, tried taking off the old ones before we left the house tonight with no success. The new ones come with regular nuts and bolts. But to get the old ones off, directions say drill from the bottom up thru the one piece holding in on, and use pliers if it turns from the top. Well, I drilled and it popped thru leaving the outer shell in place. I can’t get that off. Of course I’ll try again when I get off, just wondering if anyone else went thru this and knows a better way.
 

·
Registered
Joined
·
114 Posts
I just drilled the ones out on my old machine. Try drilling from the top as well. They are pretty weak rivets.
 

·
Registered
Joined
·
1,542 Posts
Drill the head of the rivet off and the rivet will fall apart. You will enjoy the oversize pegs.
 

·
Registered
Joined
·
724 Posts
x3, just drill the head off and they will pop off.

Love those oversized foot pegs...keeps your feet where there need to be when everything is wet and muddy.
 

·
Registered
Joined
·
85 Posts
Discussion Starter #5
Thanks guys for your replies
 
1 - 5 of 5 Posts
Top