Is there away to test the display off the 4 wheeler or test the wiring? I had a bad battery that smoke the cdi. I replaced both and now only the display is not working I've cleaned the fuse and even replacement them all. I have power from two wires going to the display. So I know the backup fuse and the ignition fuse are good. I would like to apply power to the backup led in the display to see if it's the wiring on the atv is bad
jaystone10
Joined
·
12 Posts
No i have not fixed it. I took it to a dealer and they plugged it into another grizzly and it did not work. I did open it up and checked a transformer but the rest of it was surface mount Electronics. I looked into a aftermarket display
I do not have the money to fix it right now. I just ride it will out the display hoping it does not overheat on me.
I do not have the money to fix it right now. I just ride it will out the display hoping it does not overheat on me.
Joined
·
12 Posts
How do you store your atv? Mine is in a 40 foot shipping container its not 100% sealed but gets hot. If I were you I wouldn't open it to replace the screen. All you really need is the temp light to work. Someone on here also installed a Trail Tech Vapor Tach display.
grizzlycentral.com/forum/grizzly-accessories/32021-trail-tech-vapor-tach.html
grizzlycentral.com/forum/grizzly-accessories/32021-trail-tech-vapor-tach.html
Joined
·
12 Posts
That's one reason i'm not going back oem. I'll find one with a volt meter built into it.
Joined
·
12 Posts
Under the seat.
![]()
Joined
·
12 Posts
Interesting you posted this today. I been without a display for over a year now and just bought one and installed it today. Gave 45 dollar on craigslist.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
